In Stock
$499.00 $329.00 Sale -34% OFF
-
+
  • Brand: FLSUN 
  • Product Code: Super Racer (SR)

Flsun Super Racer (SR) Delta 3D Printer

Black Friday day SALE. $179 discount 329 USD 499 USD. US Stock Ready to ship same or next business day! Limited stock

The Flsun Super Racer is a fast and relatively large delta 3D printer that offers a print area of 260 × 260 × 330mm and a maximum print speed of up to 200 mm/s. As a result, the Flsun Super Racer saves approximately half the printing time compared to standard 3D printers. The default printing speed is 150 mm/s. Two features that are also worth mentioning are the filament runout sensor and print refresh. 3D printing is possible from an SD card or via a USB port.

The ultra-quick Flsun Super Racer FDM 3D printer uses a 32-bit high-speed motherboard with four ultra-quiet TMC2209 stepper drivers and a dual-drive extruder for uninterrupted and reliable filament extrusion.


FLSun Super Racer Key features:

  • 150-200 mm/sec printing speed.
  • Large build volume 260x260x330 mm
  • Fast, Accurate, Powerful & User friendly
  • BMG Extruder clone
    • Dual Drive(Gear) extruder to more reliably extrude filaments and more reliable filament feeding. The unique dual feeding filament gear can minimize slippage and increase the filament feeding force to adapt to high-speed printing
    • Ensures jam-free feeding of flexible filaments
  • Volcano hot end
    • The Volcano Hotend allows you to print thicker and wider tracks, resulting in significantly shorter print times. Such a hotend also allows you to experiment with different nozzle sizes and flow rates and be more creative and exploratory in 3D printing with high melting capacity.
  • Heating Bed with Removable Glass Plate(Lattice)
    • The printer comes with a heating bed with two practical features—it is removable and made of tempered glass. The textured surface provides great adhesion allows you to remove models easily.
  • 32-bit motherboard with TMC 2209 driver
    • 168M high-performance 32-bit processor, higher computing speed, and with TMC2209 silent drive.
  • Linear Guide
    • High-precision linear guide, providing higher printing accuracy and stability and lower noise.Print at higher speeds while maintaining maximum print quality.
  • Removable magnetic auto-leveling sensor
    • Auto bed leveling system,  easy to start printing
  • Filament run-out sensor
  • Print recovery after power failure
  • Carbon fiber Parallel arm
    • The high-precision 3K carbon fiber rod brings a better printing surface, and the zero-gap design makes the movement more precise and the installation easier.
  • Dual air ducts for improved cooling
  • Open source Marlin firmware
    • Based on Marlin 2.0.6. the self-developed open-source firmware supports the resume printing and filament sensor function.
  • 3.5-inch capacitive color touchscreen
    • A 3.5-inch capacitive touchscreen with a redesigned user interface and optimized operating logic with user habits supports 8 display languages. It has a function for resetting the factory settings with just one button.


FLSun Super Racer (SR) Technical specifications

Print TechnologyFDM/FFF
Mechanical arrangementDelta
ManufacturerFLSun
BrandFLSun
ModelSuper Racer (SR)
Build volume

260 x 330 mm

10.24 x 13 inches

Layer resolution0.01-0.4mm
Print speed150mm/s - 200mm/s(Max)
Feeder system/Extruder typeBowden BMG Extruder Clone - Dual Drive(Gear)
Print head/Nozzle typeVolcano - 1
Nozzle size0.4mm
Max. hot end temperature240C
Nozzle heat-up time200C in 1 minute and 35 seconds
Max. heated bed temperature100C
Build plate heat-up time60C in 2 minutes and 30 seconds
Print surfaceLattice glass bed with Heated bed
CalibrationAutomatic Bed leveling system
Connectivity(Interface)USB, SD Card, USB Stick
Print recoveryYes
Filament sensorYes
CameraNo
Filament diameter1.75mm
Third-party filamentYes
Filament materialsPLA, ABS, PETG, Flexibles
Recommender slicer softwareCura,Slic3r,S3D(Simplify3D),Repetier host
OSWindows, Mac OSX, Linux
File typesSTL,OBJ,AMF,GCODE
Power Supply

Input: AC 115 - 230V, 50 - 60Hz

Output: DC 24V, 15 A, 360W

Control board

Robin Nano v3 32bits

Ultra-quiet TMC2209 stepper drivers

Marlin Based open source firmware

Display3.5" Capacitive Touch screen, extensible cord (700mm)
Languages8 languages En/Fr/De/Es/Ru/Ja/Cn/Cn(Tw)
Product weight13.5 Kg
Product dimension

437x391x960mm (spool holder mounted)

17.20x15.39x37.80 Inches(Spool holder mounted)

Shipping box weight16 Kg
Shipping box dimension

875x415x190mm

34.45x16.34x7.48 inches

Distinct features

Auto bed leveling

Volcano hot end- Dual Gear Drive

32-bit motherboard

Ultra-quiet stepper drivers

Heating bed with lattice glass plate

High Definition Digital User Interface


What's in the Box

  • 200g spool of white PLA filament
  • FLSun Super Racer (SR) User Manual
  • Spool holder
  • Clippers
  • Spare hotend (nozzle, heat block, and heat break)
  • Spare PTFE tube
  • Spare thermistor
  • Spare heater cartridge
  • Needle for nozzle clogs
  • USB Card Reader with 2GB MicroSD Card
  • Bag of screws and wires
  • Scraper
  • Hex wrenches
  • Zip ties
  • Power cable
  • USB Cable
  • Grease tube
  • Printed clips


Documentation


FLSun Super Racer (SR) User guide



BUYER PROTECTION POLICIES


100% Secure PaymentWe accept PayPal, Credit, and Debit card payments(PCI DSS Compliant)
Insured ShipmentHigh-Quality Express Transport without damage
1 Year WarrantyJust in case. Of course, we only ship out perfect products
Lifetime SupportFeel free to log the support ticket with us!


SHIPPING DETAILS


Processing(Lead) TimeAvailable in US & EU Warehouse. Ships same or next business day.
Delivery Time to Doorstep (Transit)Free Fast Shipping 3 to 5 days

Write a review

Note: HTML is not translated!
Bad           Good