Great Workhorse Dual Extruder 3D Printer: I chose to skip the cheap hobby printers and get a more commercial grade setup. One month of non stop printing with out any problems. I like the direct drive and duel extruders. Now when I look at the Creality printers they look like kid's toys

I can say that the printer is very well built and works very well out of the box. Its contructed very well and its a lot more heavy duty than the cr10

Very sturdy construction.Produces high quality prints, relatively quickly.great machine for the money you spent on.I am happy with my purchase

I was in the market for a printer with a large build area for printing models that would not fit on my Prusa. Most printers with the build area I required cost over $3,000 which was more than I was willing to pay. I started to search the Internet for the parts I would need to build one myself when I came across this printer for a very affordable price. After searching for reviews and not finding many because it was a new product I contacted the manufacturer who was very helpful and even made a video for me to see the product in action. I purchased the printer and once I received it setup was as simple as connecting two pieces and plugging in the wires. The printer comes with a single extruder setup and a double extruder setup which was used to test the printer before shipping. The hotend is very close to an E3D V6 and will accept V6 nozzles. The print heads are also magnetic which is one of my favorite features apart from the touch screen. It takes seconds to go from a single extruder to double. I just ordered an additional single extruder so I won't have to change nozzle sizes as much. The print bed is huge, I believe 15.7in x 15.7in and prints adhere to it almost too well. I purchased kapton tape to make it easier to remove the prints. I believe there is a silicon heater pad on the bottom of the bed which heats to 70°C in minutes, unfortunately the heat is mostly centered and the edges don't heat as high which hasn't been an issue for me. The touch screen is very well thought out and simple to navigate. It can be used to auto level the bed, tune prints, preheat, move axis, home and much more. The stepper motors seem to be high torque and the over all construction of the printer is Aluminum making it extremely rigid and helping with precision. I've done extremely complex bevel gears and other parts that require accuracy to function and the printer did a very good job. Depending on the settings you almost can't tell they were printed. I hope this review helps

This printer is probably the best value that you can get and customer service is second to none. The LCD is a touch screen and extremely simple to navigate. It's very well thought out. The tool heads are magnetic and take 3 seconds to switch between single and duel extruders. The magnetic connection is very strong and the printer is built like a rock so it has very nice precision.

The build quality is very high. Stable and very good components all the way. It prints just perfect

I really like the Xinkebot Orca 2+ , I simply love the easy to operate touch screen and high-quality prints. It is a fast machine and I can print big artefacts with as well. This machine is priced very low compared to the specifications it provides. Actually, the dual extruder is really cool. I am new to 3D printing, I am a small time artefact designer and this seemed like a perfect choice. Go for it, with your eyes shut!

I purchased the Xinkebot orca with great hopes. The reason turned out to be great as my expectations. Even my 13 year old daughter loves it. The borosilicate glass plate makes it really stable and good to use.

I am writing this review after using the Xinkebot Orca for a month. I can say that it is a fair buy if you are looking for a cheaper alternative to a higher-end 3D printer gMax gCreate XT+. The best quality about Xinkebot is that is highly stable. I tried and experimented various kinds of projects on it and it was really firm. The borosilicate glass-plate is a much better alternative to an average acrylic sheet. The print speed is a bit slow and the parts feel a great ends. Overall, it is a decent purchase.

The Xinkebot orca is a giant machine and the dual extruder feature makes it must buy. It has all top-quality features and they work in top conditions. Xinkebot has taken care of every single important feature and the price is still within the budget. I need a high-performance printer for my projects and this has become my assistant. There is no issue with the temperature and the parts as well as prints are of a high quality

This 3D printer has everything that I was searching for in this value range. It is to a great degree stable and conveys high exactness prints.



You can make a portion of the greatest outlines with most extreme precision in light of the fact that the whole set up is so steady. Extruder structure is streamlined and it accompanies a super attractive base that takes into consideration simple exchanging of extruder units.



It is perfect for those in the field of engineering like me

I have the Xinkebot Orca2+ dual extruder and love it! I can only echo what has been said already, their support is filled with some very talented people. . I have a Wanhao Duplicator 4 and a MendelMax, neither of which have been powered on since I received my XT. As for the bed, its great for PLA - too good. Often times it was too difficult to pull the models off the bed. I use blue painters tape for all my prints and it seems to be the best way to print. This one is easy to work on and provides a great value for the price point.

Have been asked to leave a review for this printer .Here it is !.This 3D printer has got everything that I was looking for in this price range. It is extremely stable and delivers high precision prints.



You can create some of the biggest designs with utmost accuracy because the entire set up is so stable. Extruder structure is optimized and it comes with a super magnetic base that allows for easy switching of extruder kits

It worked right out of the box.It's definitely a good printer. I have been getting very good quality prints as long as I pay attention to my settings and know my printer.It has handled this work which involves detailed prints both large and small very well.



That said, I am currently building a core-xy printer which will eliminate y-axis movement vibration since it won't be moving a big print bed back and forth.



Excellent printer -- it will get you far, but there is room to grow.

The software and electronics are opensource. This printer can be modded/built into any form of FDM 3d printer. The customer support is great. This is a great choice for any prosumer looking for a 3D printer