I have had this printer for around 2-3 years and its been running strong. I only had to replace my bowden tube and hot end nozzle during that time but aside from that, it has always been working strong. I am only now getting the chorion by anycubic for the larger build area because I have another nozzle heating issue so I figured its time to retire it. Ive done multiple 8-12 hour prints as well and it ran strong. I haven't really messed with abs because of the fumes and its difficult to work with but I've used pla and it works fantastically.

Ordered 3 i3 Megas, easy assembly and ready to print in less the 30min. I immediately switched out the solid couplers for flex couplers to deal with the slight Z banding issues. All 3 beds were flat and easy to level. Excellent print quality and will be adding more to my print farm asap!

Haven't had time to put it together yet but this was the only site that had it at the best price and considering I ordered it right at the Christmas rush, it got here fast. Thanks guys

Really delighted with the Anycubic i3 Mega. Simple to assemble, with clear instructions, and worked straight out of the box. I was printing the 'twin owls' demo withinan hour and a half, just with default settings! They were great, fast & sharply defined.

The Mega has a robust steel construction and was shockingly inexpensive, and came with a heap of tools and spare parts to boot. The heated print bed is a joy to use: the prints easily snap straight off when cool.

CURA slicer software is simple enough to update & use after watching a couple of Youtube videos.

My only gripe was it took 3DPrintersBay a tedious 10 days to dispatch to the UK from Germany, and then the printer arrived with a 2-pin EU power plug, despite my order specifying a UK 3-pin. After rumaging around I eventually found a similar power lead in my loft and was able to change a fuse, and get started.

This is my 2nd 3D printer. I wish it were my 1st and 2nd. Is 1/3 cost of a Prusa with excellent quality, similar results.

Love it..couldnt wait to print..after adjusting some settings..the parts are great..only issue is the part that tells you when filament is out..magnet not strong enough and keeps coming off...but it dont hurt anything..love it and would recommend it to anyone

As of one frustrating week, I have not gotten one successful print. Assembly was straight forward. Manual and directions (I followed thoroughly) seemed very sufficient. I have gotten excellent support from Anycubic within 24 hours. They are sending me a replacement SD card slot because my factory issue card and two new SD cards were not reading. Anycubic sent me information which was not in the manual that I suspected were critical such as homing the printer head and leveling the bed, https://youtu.be/6QhUgq4C008. The manual instructions differed and were not working. Another video they sent was online printing as my computer would not recognize the printer, https://youtu.be/6QhUgq4C008. Additionally they sent parameters that differed from manual, too long to place here.



I truly hope to get this printer up and going as I see on videos. I am looking forward to an easier operation than my SLA printer.

This was basically a turnkey solution. Assembly was quick and painless. The first prints were super easy. The printer has been busy almost nonstop for more than a week with no issues. The print bed is also AMAZING! The PLA always sticks to it, and it always releases after the bed cools. I've had to add g-code commands at the end to tell the print bed to cool off (M140 S0). It is also very nice that the kit comes with all the stuff you would need to print.



My only recommendation for someone buying this printer is: Read all of the directions before you try to use it.



Great printer!

Ovo je moj prvi 3d printer! Zadovoljan sam njime, radi dobro! Paket je stigao za 4 -5 radna dana! Prodavač je brzo odgovorio na sva moja pitanja! Preporučujem kupnju!

Once I was shown where they hid the red plug, it was up and running like a champ. Really easy to use and I love my touch screen. this is my second printer. I needed a larger bed than the Monoprice Mini Select V2 gave me. I now have two machines I love and they are printing daily. I recommend this to any first time 3D printer buyer.

Worked great out of the box. Super easy to set up. Only problem was the flash drive was junk didn't work. Would recommend it to any one wanting to get into 3D printing. Great product at a great price.

Truly an excellent printer to start with

Assembly was so easy and amazing print quality

I have two Anycubic I3 Megas and purchased them both here at 3dprintersbay.com. I truly enjoy the experience of both the printers and the purchase. My orders came quickly and ordering them was easy. The IT Mega is easy to have up and printing in just minutes when if you have never done it before. I ordered my first one in early November 2018 to print a few parts for myself but I wound up designing parts and lamps for sale and was so busy I had to order a second printer before Christmas! Now I am starting to consider a third printer, it will be purchased here at 3dprintersbay.com.

Hello,

I purchased this 3d printer before Christmas and have printed around 200 parts for our O2 system, bulkhead nipples, mask nipples and CPAP hose couplers. It has printed flawlessly every single part with no aborts or damaged parts. Parts that cost me $3 are now less than $0.50 including the cost of the 3d printer. I recommend this 3d printer very high, 5 stars. TJ

I can't be more pleased with this printer. It works great after a very easy assembly. This is my first 3D printer and I am learning a lot. If your a first-time printer buyer buy it and you'll be glad you did.