• Wanhao Duplicator 7 V1.4 to V1.5 Conversion/Upgrade kit

Estimate Shipping cost

Wanhao Duplicator 7 V1.4 to V1.5 Conversion/Upgrade kit

Right off, those familiar with the D7 1.4 will see the changed vertical gantry rail. Thats part of the main focus of this version, which addresses a tendency most printers using the single rod system towards "Z Wobble" - periodic lines or "ringing" in printed parts. Users have found ways to correct or minimize this already but naturally, we felt the design needed refinement. The D7, like any other printer model is improving!

Wanhao Duplicator 7 V1.4 to V1.5 upgrade kit

It's not just the gantry rail! Above we see just how serious the improvements get. The buildplate is now machined and polished. The gantry rail has been redesigned to use a sturdier, wider double rod and an aluminum plate block - a vast improvement over the formed sheet style v1.4 and prior that were used.

Wanhao Duplicator 7 V1.4 to V1.5 upgrade kit

The Z-Stop needed improvement, and the new method greatly improves its reliability and safety for the LCD in the event the Z-Stop switch fails. The new machined mounting system insures proper alignment of the buildplate. To top it off, the vertical gantry cap and bearing has been improved to match the new system. Stronger, Sturdier. (Credits: Wanhao university)

V1.5 upgrading kit including 

  1 building plate,

  2 x 8mm bar,

  1x z axis beam,

  1 top red cover,

  1x coupler,

  1x aluminum baseļ¼Œ

  6pcs M4 x 8mm round bolt,

  2pcs M3 x10mm hex bolt,

  2pcs spring washer

Buyer Protection Policies

      100% Secure Payment

                 PayPal-the most reliable payment method.Credit/Debit cards processed by PayPal

      DHL,UPS Insured Shipment

                 High Quality Express Transport without damage.

         1 Year Warranty

                 Just in case. Of course we only ship out perfect products.

      Technical Support Service

                 Experiencing trouble? Feel free to contact us!

Shipping Details

      Processing (Lead) Time

                  3 to 4 business days

       Delivery Time to Doorstep (Transit)

                  4 to 5 days via UPS

Wanhao Duplicator 7 V1.4 to V1.5 Conversion/Upgrade kit
This was a major improvement on the WanHay D7. The only issue I found was the vertical beam has the possibility of having 4 screws put into it to connect to the base. However, the Z axis servo overs two of those screws, and it has to be in place to assemble the vertical beam. So it is in the way. It looks from the instructions that only the two screw holes available, after putting the servo and Z axis lead screw. are used. I worked around this to get at least one more screw in by putting in one of the screws that is covered by the servo. Then pivoting the servo in place completing the servo and Z axis lead screw assembly then putting in the last two screws available for the vertical beam. Now there are 3 screws holding the beam instead of two. I like those odds a lot better.
Wanhao Duplicator 7 V1.4 to V1.5 Conversion/Upgrade kit
1.5 upgrade complete, first test print done in 2 hours. Upgraded from 1.4 so end stop sensor was perfect. The rails are very nice indeed. Managed to re-use the 3M tape with no issues.

Write a review

Note: HTML is not translated!
    Bad           Good

Wanhao Duplicator 7 V1.4 to V1.5 Conversion/Upgrade kit

$75.00 $120.00
Valid till

    Credit Cards processed by Secure PayPal Gateway

  • Order Fulfillment by : WANHAO
  • Product Code: WANHAO-BAY-0188
  • Availability: InStock

PayPal Acceptance Mark

Vendor Profile

  • Wanhao  Verified Vendor
  • Company: Wanhao 3D Printer
  • Total Orders: 47003
  • Total Products: 22

Rating: 5/5.
Based on 2 reviews / Write a review

Related Products

Tags: Wanhao, Resin, D7, Wanhao Duplicator 7, v1.5