Out Of Stock
$99.00 $79.00 Sale -20% OFF
  • Brand: PHROZEN 
  • Product Code: BEIGE-FLEX

Phrozen Beige Flex is a great budget Flex UV resin compatible with most popular LCD 3D printers. Phrozen Shape: Eliminate Your Printing Barriers, Just Print It !

Phrozen Beige Flex headlines

  • Volume: 500g per bottle
  • Layer Height / Parameter: 10 sec @ 50 um, Delay 3
  • Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
  • Z Resolution (Layer Height): 30-100um
  • Property:  High hardness, toughness and resolution.
  • Suitable for: All LCD 3D Printer
  • Application: General modeling & prototyping
  • Compatible Printer: Phrozen 3D Printer Series


  • Viscosity: 545 cps (25C)
  • Density: 1.19 g / cm3
  • Tensile Stress (Break): 40 MPa
  • Elongation: 50-60%
  • Tensile Modulus: 192 MPa
  • Hardness: Shore 65D
  • Heat Deflection Temperature @0.45MPa: 100C

Operating instructions

  • Suggest to use our resin and printer indoor under ventilated situation.
  • Avoid exposure to sunlight and indoor luminescence.
  • Please preserve our resin in closed opaque bottle in avoid of exposure to air.
  • Do not mix used and non-used resin together.
  • Please keep the resin away from kids.
  • Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Rules

  • Do not eat and swallow the resin. Go to hospital if necessary.
  • Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
  • Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
  • Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
  • Suggested safety equipment: gloves, mask, goggles, and lab coat.
  • Keep resin in room temperature(15 – 35 OC) and dry condition.

Write a review

Note: HTML is not translated!
Bad           Good