In Stock
$99.00 $79.00 Sale -20% OFF
  • Brand: PHROZEN 
  • Product Code: WATER-WASHABLE

Phrozen Water washable Rapid Resin Black

Ready to ship within 1 to 2 Business days


  • Water washable: Unlike standard resin, Phrozen water washable resin can be cleaned with normal water, no IPA needed
  • Low viscosity: Phrozen water washable Resin is easy to print and post process due to its low viscosity
  • Low odor: More pleasant to use in an office or home environment
  • Fast printing: Phrozen water washable Resin is customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle & 1.5 sec on Sonic (50µm)
  • Tough & non-brittle: Typical water washable resin is brittle, but not Phrozen’s water washable resins. Printed parts from Phrozen Water-Washable Resin have a good hard and toughness. It is perfect match for models, prototyping and much more


  • Contents: 0.5, 1KG
  • XY Planar Resolution: 47 micron
  • Z Resolution (Layer Height): 30-100um
  • Normal layer time: Shuffle: 7 sec @ 50 um, Sonic 1.5 sec @ 50 um
  • Property:  High hardness, toughness and resolution.
  • Way to Rinse:Clean with alcohol spray with air gun
  • Suitable for: LCD 3D Printer 405nm UV
  • Application: Tough & Non-Brittle
  • Colour: Black
  • Viscosity: Low
  • Odor: Low


  • Viscosity: 149 cps
  • Density: 1.05 g / cm3
  • Tg: 87C
  • Tensile Stress (Break): 21 MPa
  • Hardness: Shore 80D
  • Elongation: 14 %
  • I-Zod Impact: 1.52 KJ/m2

How to use

  • DO NOT rinse printed objects under the tap
  • Water washable UV resin is just as dangerous as normal UV resins
  • Please make sure these chemicals do not get into the environment
  • Always wear personal protection (gloves, glasses) when handling resin
  • Clean water washable printed objects in one or two stages
  • Use tubs/containers filled with water
  • Dry with air
  • DO NOT throw away the waste water without post processing
  • 1) Cure the resin contaminated waste water with an UV Lamp or Sunlight
  • 2) Filter the solid resin particles out of the waste water
  • 3) Dispose waste water
  • 4) The remaining filtered particles should be treated and recycled as plastic waste
  • Please preserve our resin in closed opaque bottle in avoid of exposure to air
  • Do not mix used and non-used resin together

Notes & Warnings

  • WARNING water washable UV resins are dangerous chemicals just like normal UV resins
  • DO NOT rinse printed objects under the tap
  • DO NOT throw away the rinse waste water without post processing
  • DO NOT let these chemicals get into our environment
  • Always wear personal protection (gloves, glasses) when handling resin
  • Use your resin 3D printer under well ventilated circumstances
  • Suggested safety equipment: gloves, mask, glasses, and lab coat
  • Do not expose UV resin to sunlight or indoor light containing UV
  • In case you consume UV resin, get medical advise
  • In case resin get’s in your eye, wash your eyes with water and get medical advise
  • Resin can cause skin irritation, always wear gloves when handling
  • Please keep UV resin away from kids
  • Keep resin at room temperature(15 – 35 OC) and dry condition.

Write a review

Note: HTML is not translated!
Bad           Good