Estimate Shipping cost
Folger Tech FT-5 Large Scale 3D Printer Kit
This item has been discontinued due to the release of its successor called Folgertech FT-5 R2- Full of CNC Cut ACM (Aluminium composite Material) and Higher wattage bed for Faster heating.
Folgertech FT-5 is a Large Scale 3D printer kit boasting a huge 12inx12in15.75in print area. The kit comes with everything you need to assemble the machine with the use of a few simple tools. The highlights of this kit are the massive build area, Linear rails on the X and Y movements. Dual Y and Z motors for additional speed and power. This kit also includes an 12 V aluminum build surface/headed bed capable of printing many materials including PLA and ABS.
|Print Area||300x300x~400mm (12x12x15.75") Build area|
|Power||360w 12V system CE rated Power Supply, can use 110v or 220v|
|Max Extruder Temp||245C (can reach higher but will shorten the longevity of the extruder)|
|Max Bed Temp||100C|
|Chassis||X/Y Linear Rail System/ Dual X and Y Motor for added speed and power|
|Controller||MKS Gen 1.4|
|Resolution||0.05mm (50 Microns)|
|Build surface||12V Aluminium Heated Bed|
|SHIPPING WEIGHT||45lbs! (21kg)|
Buyer Protection Policies
PayPal-the most reliable payment method.Credit/Debit cards processed by PayPal
UPS Ground / USPS
High Quality Express Transport without damage.
1 Year Warranty
Just in case. Of course ships out perfect products.
Technical Support Service
Experiencing trouble? Feel free to contact us!
Ships in 1 to 2 Business day(s)
Delivery Time to Door step
4 to 5 days via UPS Ground/USPS
** As we receive customer feedback we do make small alterations to the kit if we feel they improve the kits performance and stability, the kit you receive might reflect some of these slight changes and improvements.
The Folger Technologies FT-5 is a great kit combining the simplicity of an erector set with the power of a much more expensive desktop printer.
This Kit includes the following:
2004 LCD with SD card Reader
Laser cut Frame (Melamine )
x4 LMF8LUU Linear Bearings
x8 SK8 Mounts
x4 KP08 bearings
x3 Idler Pulley
4x 8mm Chromed Linear Rod for Z (Pre-Cut)
2x T8 4 Start Lead Screw 8mm pitch
x1 300mmx300mm Heated Bed
x1 Direct Drive Extruder w/ Injection Molded Parts for 1.75mm ABS/PLA/Wood/HIPS/PETG
360W 12v 30A Power Supply
x6 NEMA 17 5.0kg/cm Stepper Motors
3x 400mm 12mm Linear Rails
x3 Meters of GT2 Belt
x2 GT2-188 Belt
x7 20 Tooth Pulleys
x1 MKS Gen 1.4 Controller
x5 A4988 Stepper Drivers
x1 Roll of 8mm Kapton Tape
x3 Electronic End Stop Circuits w/ LED
x3 Belt Tensioners
x8 Threaded Bed Adjustment Knobs
x8 Bed Springs
All Required Nuts/Bolts for Assembly
Impressive 300mmx300mmx~400mm Build Area
Able to print ABS & PLA Plastic (1.75mm)
Can run 110V or 220V (Only Comes With US Cord)
Items you will need:
Build Guide / Firmware and Software
This is a kit of components for assembly into a 3D Printer by the end user. Building and using the printer is potentially very dangerous as it involves electricity and high temperatures.
Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided fully comprehensive build documentation to enable you to build your Folger Tech 3D Printer Kit in a safe manner.
However ultimately we cannot be responsible for your health and safety whilst building or operating the printer, with that in mind be sure you are confident with what you are doing prior to commencing with building or buying. Read all of the manual to enable you to make an informed decision.
Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn't ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn't be taken lightly.
High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation.
We wouldn't recommend leaving your printer running unattended.We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer
Folger Tech FT-5 Large Scale 3D Printer Kit
Credit Cards processed by Secure PayPal Gateway
- Order Fulfillment by : FOLGERTECH
- Product Code:
- Availability: In Stock