Phrozen Beige Flex is a great budget Flex UV resin compatible with most popular LCD 3D printers. Phrozen Shape: Eliminate Your Printing Barriers, Just Print It !

Volume: 500g per bottle
Layer Height / Parameter: 10 sec @ 50 um, Delay 3
Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
Z Resolution (Layer Height): 30-100um
Property: High hardness, toughness and resolution.
Suitable for: All LCD 3D Printer
Application: General modeling & prototyping
Compatible Printer: Phrozen 3D Printer Series

Suggest to use our resin and printer indoor under ventilated situation.
Avoid exposure to sunlight and indoor luminescence.
Please preserve our resin in closed opaque bottle in avoid of exposure to air.
Do not mix used and non-used resin together.
Please keep the resin away from kids.
Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Do not eat and swallow the resin. Go to hospital if necessary.
Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
Suggested safety equipment: gloves, mask, goggles, and lab coat.
Keep resin in room temperature(15 – 35 OC) and dry condition.

Please wait...