+
+
Phrozen Nylon Like Green engineering resin
Phrozen Nylon Like Green
- Volume: 1L per bottle
- Viscosity: 742 cps
- Elongation: 130%
- Break value: 19 MPa
- Hardness: Shore 68 D
- I-Zod Impact: 23.79 KJ/m2
Operating instructions
- Suggest to use our resin and printer indoor under ventilated situation.
- Avoid exposure to sunlight and indoor luminescence.
- Please preserve our resin in closed opaque bottle in avoid of exposure to air.
- Do not mix used and non-used resin together.
- Please keep the resin away from kids.
- Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.
Safety Rules
- Do not eat and swallow the resin. Go to hospital if necessary.
- Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
- Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
- Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
- Suggested safety equipment: gloves, mask, goggles, and lab coat.
- Keep resin in room temperature(15 – 35 OC) and dry condition.
Phrozen nylon-like green resin profiles CLICK HERE
