+
+
Phrozen Rock Black Stiff Resin
2x500g for 10% OFF
Phrozen Rock Black Resin is a great engineering resin for strong detailed prints, it’s stronger then ABS Like Grey and ABS Like White and it has less smell. You can drive a screw into it and it won’t break!
Phrozen Rock Black Resin Specifications
- Volume: 2x 500g per bottle for 10% OFF
- XY Planar Resolution: 0.050 mm
- Z Resolution (Layer Height): 30-100um
- Property: High hardness, toughness and resolution.
- Way to Rinse：Clean with alcohol spray with air gun
- Suitable for: LCD 3D Printer
- Application: General modeling & prototyping
Operating instructions
- Suggest to use our resin and printer indoor under ventilated situation.
- Avoid exposure to sunlight and indoor luminescence.
- Please preserve our resin in closed opaque bottle in avoid of exposure to air.
- Do not mix used and non-used resin together.
- Please keep the resin away from kids.
- Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.
Safety Rules
- Do not eat and swallow the resin. Go to hospital if necessary.
- Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
- Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
- Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
- Suggested safety equipment: gloves, mask, goggles, and lab coat.
- Keep resin in room temperature(15 – 35 OC) and dry condition.
